TEC has been issuing elongated quarter convention badges in conjunction with the annual American Numismatic Association convention since TEC’s first annual meeting of 1967. As you can see from the images below, the designs of these fine elongates are varied and creative – often reflecting the charms of the convention’s host cities.
In 1989, TEC also began producing a colored, enameled version of the convention badge. Currently, the regular convention badges are sold to the general public at their respective ANA conventions, while the enameled versions are only available to TEC members on a pre-order basis (details and deadlines for pre-ordering these treasures are announced in TEC Quarterly Newsletter).
(List originally compiled by Joe Burford TEC #1111)
1960s – 1970s – 1980s – 1990s – 2000s – 2010s – 2020s
1967
|
Dates |
August 8-12, 1967 |
Location |
Miami Beach, FL |
Denomination |
Canadian Silver Quarters |
Mintage |
272 |
Designer |
Lloyd E. Wagaman |
Engraver |
Overman Engraving |
Roller |
Lloyd E. Wagaman |
Notes: 4 Quarters were rolled after the die was destroyed.
The ribbon is red and hand stitched by Alberta Wagaman.
[FLA.#3] |
1968
|
Dates |
August 20-24, 1968 |
Location |
San Diego, CA |
Denomination |
Clad Quarters |
Mintage |
418 |
Designer |
Lloyd E. Wagaman |
Engraver |
Overman Engraving |
Roller |
Lloyd E. Wagaman |
Notes: 4 Quarters were rolled after the die was destroyed. The ribbon is sage green, pinked and stitched by Alberta Wagaman. Each badge was stamped with members numbers, they had first rights to these, then they were for sale to anyone.
[CALIF.#4] |
1969
|
Dates |
August 12-16, 1969 |
Location |
Philadelphia, PA |
Denomination |
Clad Quarters |
Mintage |
250 |
Designer |
Lloyd E. Wagaman |
Engraver |
Overman Engraving |
Roller |
Lloyd E. Wagaman |
Notes: 4 Quarters were rolled after the die was destroyed. The ribbon is pink and hand stitched by Alberta Wagaman.
[PENN.#2] |
1970
|
Dates |
August 18-22, 1970 |
Location |
St Louis, MO |
Denomination |
Clad Quarters |
Mintage |
250 |
Designer |
Norman & Ruth MacQuithy |
Engraver |
Norman & Ruth MacQuithy |
Roller |
Norman & Ruth MacQuithy |
Note: The ribbon is red, white and blue. |
1971
|
Dates |
August 10-14, 2971 |
Location |
Washington, DC |
Denomination |
Clad Quarters |
Mintage |
250 |
Designer |
Norman & Ruth MacQuithy |
Engraver |
Norman & Ruth MacQuithy |
Roller |
Norman & Ruth MacQuithy |
Note: The ribbon is royal blue. |
1972
|
Dates |
August 15-19, 1972 |
Location |
New Orleans, LA |
Denomination |
Clad Quarters |
Mintage |
161 |
Designer |
Lloyd E. Wagaman |
Engraver |
Lloyd E. Wagaman |
Roller |
Lloyd E. Wagaman |
Notes: 5 Quarters were rolled after the die was destroyed. The ribbon is gold mesh and hand stitched by Alberta Wagaman. [LA#2] |
1973
|
Dates |
August 23 – 27, 1973 |
Location |
Boston, MA |
Denomination |
Clad Quarters |
Mintage |
200 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1974
|
Dates |
August 13 – 18, 1974 |
Location |
Bal Harbor, Miami, FL |
Denomination |
Clad Quarters |
Mintage |
200 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1975
|
Dates |
August 19 – 24, 1975 |
Location |
Los Angeles, CA |
Denomination |
Clad Quarters |
Mintage |
200 |
Designer |
Sally Kirka |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1976
|
Dates |
August 24 – 29, 1976 |
Location |
New York, NY |
Denomination |
Bicentennial Clad Quarters |
Mintage |
150 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1977
|
Dates |
August 23 – 28, 1977 |
Location |
Atlanta, GA |
Denomination |
Clad Quarters |
Mintage |
160 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1978
|
Dates |
August 21 – 26, 1978 |
Location |
Houston, TX |
Denomination |
Clad Quarters |
Mintage |
200 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1979
|
Dates |
July 29 – August 3, 1979 |
Location |
St. Louis, MO |
Denomination |
Clad Quarters |
Mintage |
200 |
Designer |
Robert W. Luchtman |
Engraver |
Robert W. Luchtman |
Roller |
Robert W. Luchtman |
Notes: The ribbon is red, white and blue. |
1980
|
Dates |
August 18 – 22, 1980 |
Location |
Cincinnati, OH |
Denomination |
Clad Quarters |
Mintage |
150 |
Designer |
Lee Martin |
Engraver |
Adam Cool |
Roller |
Claude Thomas |
Notes: The ribbon is red and hand stitched. The Membership Cent die was used. |
1981
|
Dates |
July 29 – August 2, 1981 |
Location |
New Orleans, LA |
Denomination |
Clad Quarters |
Mintage |
125 |
Designer |
Ron Chatman |
Engraver |
Ron Chatman |
Roller |
Claude Watt |
Notes: The ribbon is red, white and blue. This quarter size die was used to make the membership cent. |
1982
|
Dates |
August 16 – 23, 1982 |
Location |
Boston, MA |
Denomination |
Clad Quarters |
Mintage |
100 |
Designer |
Sally Kirka |
Engraver |
Robert W. Luchtman |
Roller |
Sally Kirka |
Notes: The ribbon is red, white and blue. |
1983
|
Dates |
August 15 – 21, 1983 |
Location |
San Diego, CA |
Denomination |
Clad Quarters |
Mintage |
100 |
Designer |
Sally Kirka |
Engraver |
Robert W. Luchtman |
Roller |
Sally Kirka |
Notes: The ribbon is red, white and blue. |
1984
|
Dates |
July 28 – August 1, 1984 |
Location |
Detroit, MI |
Denomination |
Bicentennial Clad Quarters |
Mintage |
100 |
Designer |
Frank Brazzell |
Engraver |
Frank Brazzell |
Roller |
Frank Brazzell |
Notes: The ribbon is red, white and blue. |
1985
|
Dates |
August 20 – 25, 1985 |
Location |
Baltimore, MD |
Denomination |
Clad Quarters |
Mintage |
85 |
Designer |
Sally Kirka |
Engraver |
Robert W. Luchtman |
Roller |
Sally Kirka |
Notes: The ribbon is red, white and blue. |
1986
|
Dates |
August 5 – 10, 1986 |
Location |
Milwaukee, WI |
Denomination |
Clad Quarters |
Mintage |
72 |
Designer |
Frank Brazzell |
Engraver |
Frank Brazzell |
Roller |
Frank Brazzell |
Notes: The ribbon is red, white and blue. |
1987
|
Dates |
August 26 – 30, 1987 |
Location |
Atlanta, GA |
Denomination |
Clad Quarters |
Mintage |
100 |
Designer |
Frank Brazzell |
Engraver |
Frank Brazzell |
Roller |
Frank Brazzell |
Notes: The ribbon is a U.S. Flag |
1988
|
Dates |
July 20 – 24, 1988 |
Location |
Cincinnati, OH |
Denomination |
Clad Quarters |
Mintage |
100 |
Designer |
Frank Brazzell |
Engraver |
Frank Brazzell |
Roller |
Frank Brazzell |
Notes: The ribbon is a U.S. Flag |
1989
|
Dates |
August 9 – 13, 1989 |
Location |
Pittsburgh, PA |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 28 |
Designer |
Bert Samsa |
Engraver |
Frank Brazzell |
Roller |
Frank Brazzell |
Notes: The ribbon is a U.S. Flag. First of the enameled colored badges. The colors are blue, red and green. Enameled by: Bert Samsa. |
1990
|
Dates |
August 22 – 26, 1990 |
Location |
Seattle, WA |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 48 |
Designer |
Bert Samsa |
Engraver |
Bert Samsa |
Roller |
Bert Samsa |
Notes: The ribbon on the convention badge is green. The ribbon on the enameled badge is green and yellow. The enameled badge colors are green, red, brown and yellow. Enameled by Bert Samsa. |
1991
|
Dates |
August 13 – 18, 1991 |
Location |
Chicago, IL |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 49 |
Designer |
Bert Samsa |
Engraver |
Bert Samsa |
Roller |
Bert Samsa |
Notes: The convention badge ribbon is orange. The enameled badge ribbon is orange and white. The enameled badge colors are bright orange, red and brown. Enameled by Bert Samsa. |
1992
|
Dates |
August 21 – 16, 1992 |
Location |
Orlando, FL |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 31 |
Designer |
Bert Samsa |
Engraver |
Bert Samsa |
Roller |
Bert Samsa |
Notes: The convention badge ribbon is red, white and blue. The enameled badge ribbon is red, orange, yellow, green, blue and dark blue. The enameled badge colors are red, brown and green. Enameled by Bert Samsa. |
1993
|
Dates |
July 28 – August 1, 1993 |
Location |
Baltimore, MD |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 39 |
Designer |
Bert Samsa |
Engraver |
Frank Brazzell
Bert Samsa |
Roller |
Raymond W. Dillard
Bert Samsa |
Notes: This is the only time that two different engravers made Convention Badges. The badge ribbon is red, white and blue. The enameled badge ribbon is red, orange, yellow, green, blue and dark blue. The enameled badge colors are yellow, red, blue and brown. Enameled by: Bert Samsa. [FB-1229] |
1994
|
Dates |
July 27 – August 31, 1994 |
Location |
Detroit, MI |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 40 |
Designer |
Raymond W. Dillard |
Engraver |
Frank Brazzell |
Roller |
Raymond W. Dillard |
Notes: Convention Badge ribbon is red, white and blue. Enameled Badge ribbon is red and white. The enameled badge colors are blue, red, white, gold, brown and green. Enameled by: Silvertowne. |
1995
|
Dates |
August 16 – 20, 1995 |
Location |
Anaheim, CA |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 40 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon is red, white and blue for both badges. The enameled badge colors are blue, brown, orange, black and white. Enameled by Silvertowne. |
1996
|
Dates |
August 14 – 18, 1996 |
Location |
Denver, CO |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 31 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon is red, white and blue for both badges. The enameled badge colors are red, brown, yellow, purple, green, blue and white. Enameled by: Silvertowne. |
1997
|
Dates |
July 30 – August 3, 1997 |
Location |
New York, NY |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
80 / 36 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon is red, white and blue for both badges. The enameled badge colors are blue, brown, red, green and yellow. Enameled by: Silvertowne. |
1998
|
Dates |
August 5 – 9, 1998 |
Location |
Portland, OR |
Denomination |
Clad Quarters / Silver Quarters |
Mintage |
100 / 30 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon for the badge is red, white and blue. The enameled badge ribbon is red and white with a red rose in the center. The enameled badge colors are blue, red, yellow, brown, green and black. Enameled by Silvertowne. |
1999
|
Dates |
August 10 – 15, 1999 |
Location |
Chicago, IL |
Denomination |
DE State Quarters / Silver Quarters |
Mintage |
100 / 36 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: Both ribbons are red, white and blue. The enameled badge colors are red, brown, blue, yellow and light blue. Enameled by Silvertown. |
2000
|
Dates |
August 9 – 13, 2000 |
Location |
Philadelphia, PA |
Denomination |
Golden Sacagawea Dollars |
Mintage |
100 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbons on both badges are red, white and blue. The enameled colors are green, red, blue, brown, white and gold. Enameled by: Jana Wilson |
2001
|
Dates |
August 9 – 13, 2001 |
Location |
Atlanta, GA |
Denomination |
Golden Sacagawea Dollars |
Mintage |
100 / 40 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The convention badge ribbon is red, white and blue. The enameled badge ribbon is red and white for the first 25. The second 25 were red, white and blue. The enameled colors are green, red, white, blue and brown. Enameled by: Jana Wilson |
2002
|
Dates |
July 31 – August 4, 2002 |
Location |
New York, NY |
Denomination |
NY State Quarters |
Mintage |
100 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The convention badge ribbon is a U.S. Flag. The enameled badge is a Gold Plated New York State Quarter. The ribbon is gold trim with red, white and blue. The enameled colors are green, red, white, blue and brown. Enameled by: Jana Wilson |
2003
|
Dates |
July 30 – August 3, 2003 |
Location |
Baltimore, MD |
Denomination |
MD State Quarter / Golden Sacagawea Dollars* |
Mintage |
85 / 52 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The convention badge ribbon is gold trim with red, white and blue. *The first 50 enameled badges were made on Golden Sacagawea Dollars. One was made on a half dollar and one made on a Maryland State Quarter. The ribbon is black and yellow. (The two special badges have gold trim with red, white and blue on the ribbon.) The enameled colors are blue, black, yellow, brown, red and white. Enameled by: Jana Wilson |
2004
|
Dates |
August 18 – 22, 2004 |
Location |
Pittsburgh, PA |
Denomination |
PA State Quarters |
Mintage |
80 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The badge ribbons are red, white and blue. The enameled badge ribbon is gold trim with red, white and blue. The enameled colors are blue, gold, brown, black and silver. Enameled by: Jana Wilson |
2005
|
Dates |
July 27 – 31, 2005 |
Location |
San Francisco, CA |
Denomination |
CA State Quarters |
Mintage |
75 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The convention badge ribbon is gold trim with red, white and blue. The enameled colors are blue, red, white, brown, black and yellow. Enameled by JW – Enameling, Jana Wilson. |
2006
|
Dates |
August 16 – 20, 2006 |
Location |
Denver, CO |
Denomination |
CO State Quarters |
Mintage |
75 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbons are gold trim with red, white and blue. The enameled colors are blue, white, brown, black, purple and gold. Enameled by JW-Enameling, Jana Wilson |
2007
|
Dates |
August 8 – 12, 2007 |
Location |
Milwaukee, WI |
Denomination |
WI State Quarters / Presidential Dollar Statue of Liberty |
Mintage |
75 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbons are gold trim with red, white and blue. The enameled badge colors are green, white, brown, black and gold. Enameled by: JW-Enameling, Jana Wilson. |
2008
|
Dates |
July 30 – August 3, 2008 |
Location |
Baltimore, MD |
Denomination |
MD State Quarters / Golden Sacagawea Dollars |
Mintage |
85 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon for the badge is gold trim with red, white and blue. The enameled badge ribbon is a U.S. Flag. The enameled badge colors are red, white, blue, silver, copper and gold. Enameled by JW-Enameling, Jana Wilson. |
2009
|
Dates |
August 5 – 9, 2009 |
Location |
Los Angeles, CA |
Denomination |
CA State Quarters / Presidential Dollars |
Mintage |
80 / 50 |
Designer |
Raymond W. Dillard |
Engraver |
William M. Grencavich |
Roller |
Raymond W. Dillard |
Notes: The ribbon for the badge is red, white and blue. The enameled badge ribbon is gold trim with red, white and blue. The enameled badge colors are white, blue, green, brown, yellow and emerald green. Hand Painted by Paul Conner. |
2010
|
Dates |
August 11 – 15, 2010 |
Location |
Boston, MA |
Denomination |
MA State Quarter |
Mintage |
75 / 45 |
Designer |
Raymond W. Dillard |
Engraver |
Lee Bowser (etched)
James Kilcoyne |
Roller |
Raymond W. Dillard |
Notes: The ribbons on both badges gold trim with red, white and blue. The painted colors are red and blue. Enameled by JW-Enameling, Jana Wilson, Ridgeway, IN. |
2011
|
Dates |
August 16 – 20, 2011 |
Location |
Chicago, IL |
Denomination |
Quarters |
Mintage |
60 / 40 |
Designer |
Raymond W. Dillard |
Engraver |
Lee Bowser |
Roller |
Raymond W. Dillard |
Notes: The convention badge ribbon is red, white and blue. The enameled badge ribbon is a U.S. Flag. The enameled colors are blue, red, white and brown. Enameled by ? |
2012
|
Dates |
May 10 – 12, 2012 |
Location |
Denver, CO |
Denomination |
Nickel |
Mintage |
Unknown |
Designer |
Don Berry |
Engraver |
pennycollector.com |
Roller |
Don Berry |
Notes: This badge was made for the spring show and is on a mustard yellow ribbon. |
2012
|
Dates |
August 7 – 11, 2012 |
Location |
Philadelphia, PA |
Denomination |
Quarters |
Mintage |
20 / 31 |
Designer |
Brad Ream |
Engraver |
Brad Ream |
Roller |
Brad Ream |
Notes: The badge ribbons are a U.S. Flag. The enameled colors are blue, red and brown. Enameled by ? |
2012
|
Dates |
October 18 – 20, 2012 |
Location |
Dallas, TX |
Denomination |
Nickel |
Mintage |
Unknown |
Designer |
Don Berry |
Engraver |
pennycollector.com |
Roller |
Don Berry |
Notes: This badge was made for the fall show. The top coin is the ANA design and the hanging coin is the TEC design. |
2013
|
Dates |
August 13 – 17, 2013 |
Location |
Chicago, IL |
Denomination |
Quarter |
Mintage |
50 / 20 |
Designer |
Cindy Calhoun &
Nancy Wooten |
Engraver |
John Edward Gusmano |
Roller |
Ed Calhoun &
John Wooten |
Notes: The convention badge ribbon is red, white and blue. The enameled badge ribbon is gold with red, white and blue. The enameled colors are brown and blue. Enameled by Silvertowne. |
2014
|
Dates |
August 5 – 9, 2014 |
Location |
Chicago, IL |
Denomination |
Quarters |
Mintage |
25 / 25 |
Designer |
Cindy Calhoun |
Engraver |
John Edward Gusmano |
Roller |
Ed Calhoun &
John Wooten |
Notes: The badge ribbons is red, white and blue. The enameled badge ribbon is gold with red, white and blue. The enameled colors are brown, purple and gray. Enameled by Silvertowne. |
2015
|
Dates |
March 5 – 7, 2015 |
Location |
Portland, OR |
Denomination |
Quarters |
Mintage |
Unknown |
Designer |
Cindy Calhoun |
Engraver |
John Edward Gusmano |
Roller |
Cindy Calhoun |
Notes: Badge made for the Spring National Money Show |
2015
|
Dates |
August 11 – 15, 2015 |
Location |
Chicago, IL |
Denomination |
Quarters |
Mintage |
30 / 30 |
Designer |
Cindy Calhoun |
Engraver |
John Edward Gusmano |
Roller |
Calhoun Family (Ed, Cindy &
Grandsons Adam & Grant) |
Notes: The convention badge ribbon is mustard yellow. The enameled badge ribbon is gold with red, white and blue. The enameled colors are blue, brown, red, yellow. Enameled by Silvertowne. |
2016
|
Dates |
August 9 – 13, 2016 |
Location |
Anaheim, CA |
Denomination |
Quarters |
Mintage |
50 / Unknown |
Designer |
Cindy Calhoun &
Raymond W. Dillard |
Engraver |
Tenibac |
Roller |
Cindy Calhoun &
Raymond W. Dillard |
Notes: The ribbons are all red, white and blue. The Mickey eared owl badge was designed by Cindy Calhoun and 50 were made because it was TEC’s 50th Anniversary. A second badge was designed and rolled by Ray Dillard. Enameled by Silvertowne. |
2017
|
Dates |
August 1 – 5 , 2017 |
Location |
Denver, CO |
Denomination |
CO State Quarters |
Mintage |
30 / 25 |
Designer |
Cindy Calhoun |
Engraver |
John Edward Gusmano |
Roller |
Cindy Calhoun |
Notes: The convention badge ribbon is gold with red, white and blue. The enameled badge ribbon is red, white and blue. The enameled color is blue. Enameled by Cindy Calhoun and Laura Mazer. |
2018
|
Dates |
August 14 – 18, 2018 |
Location |
Philadelphia, PA |
Denomination |
PA State Quarter / Bicentennial Quarters |
Mintage |
30 / 25 |
Designer |
Tyler Tyson |
Engraver |
Tenibac |
Roller |
Cindy Calhoun &
Tyler Tyson |
Notes: The ribbon for the badges are gold trim with red, white and blue. Enameled in red, white, blue, yellow and brown. Enameled by Cindy Calhoun and Laura Mazer |
2019
|
Dates |
August 13 – 17, 2019 |
Location |
Chicago, IL |
Denomination |
IL State Quarter / Quarter |
Mintage |
|
Designer |
Paul Conner |
Engraver |
Gusmano |
Roller |
Tyler Tyson |
Notes: The badge ribbon is blue. The enameled badge ribbon is blue with white and pink stripes. Enameled blue, red and green by Cindy Calhoun and Laura Mazer. The original badge die was engraved backwards and a limited number of “error coins” were made available for sale. |
2020
|
Dates |
August 4 – 8, 2020 |
Location |
Pittsburgh, PA |
Denomination |
PA State Quarter |
Mintage |
?? / 25 |
Designer |
Cindy Calhoun |
Engraver |
Gusmano |
Roller |
Cindy Calhoun |
Notes: The ribbon for the badge is mustard yellow. The ribbon for the enameled badge is golden yellow. The badge is enameled white, red, yellow and blue by Cindy Calhoun. |
2021
|
Dates |
August 10 – 14, 2021 |
Location |
Chicago, IL |
Denomination |
IL State Quarter |
Mintage |
|
Designer |
Cindy Calhoun |
Engraver |
Gusmano |
Roller |
Cindy Calhoun |
Notes: The ribbon for the badges is blue. The enameled badge is yellow, brown, green, blue and red. Enameled by Cindy Calhoun. |
2022
|
Dates |
August 16 – 20, 2022 |
Location |
Rosemont, IL |
Denomination |
Clad Quarter |
Mintage |
40 / 30 / 15 |
Designer |
Paul Conner |
Engraver |
Gusmano |
Roller |
Tyler Tyson |
Notes: Enameled Badge is on a Red Drape with enameled colors of gold, black, red and green. A Limited Edition “frosted” version was created on a white drape.
Enameled by Joyce Shelton |
2023
|
Dates |
August 9 – 12, 2023 |
Location |
Pittsburgh, PA |
Denomination |
Quarter |
Mintage |
40R/30E |
Designer |
Tyler Tyson |
Engraver |
Gusmano |
Roller |
Tyler Tyson |
Note: Enameled by Joyce Shelton |
2024
|
Dates |
August 6 – 10, 2024 |
Location |
Rosemont (Chicago), IL |
Denomination |
Quarter |
Mintage |
40R/30E |
Designer |
Paul Conner, Joyce Maxwell Tyson |
Engraver |
Alex Mruk |
Roller |
Tyler Tyson |
Notes: Enameled by Joyce Shelton |